Two series of allyl sulfonamides, prepared from Morita-Baylis-Hillman adducts and primary aromatic sulfonamides, were fully characterized. The Z configuration for the products derived from 2-[hydroxy(phenyl)methyl]acrylonitrile (1) and E configuration for those derived from methyl 2-[hydroxy(phenyl)methyl]acrylate (2) were confirmed by X-ray diffraction for one compound of each series (1e, 2f). Density functional theory calculations for all allyl sulfonamides agreed with the X-ray crystallographic data. X-ray diffraction studies indicate that these compounds form dimers in their crystal structures. Fingerprint plots show that compound 1e is stabilized by H⋯H, C⋯H/H⋯C, O⋯H/H⋯O and N⋯H/H⋯N interactions, while the compound 2f has no N⋯H/H⋯N contacts. Hirshfeld surface analyses were performed to gain insight into the behavior of these interactions. Calculated frontier orbitals showed that their highest occupied and lowest unoccupied molecular orbitals are antibonding orbitals. The allyl sulfonamides 1e and 2f are among the most active compounds in each series, inhibiting approximately 60% of the mycelial growth of Botrytiscinerea at 3 mmol L-1.

Twelve tetraphenylphosphonium allyldithiocarbimates were synthesized and fully characterized by high-resolution electrospray ionization mass spectrometry (HR-ESI-MS), infrared and nuclear magnetic resonance (NMR) spectroscopies. The spectroscopic data indicated that the allyldithiocarbimate anions present Z configuration, as confirmed by X-ray crystallography. These new compounds inhibited the germination of Phakopsora pachyrhizi and Hemileia vastatrix at very low doses, with IC50 (concentration to achieve 50% of inhibition of spore germination) values ranging from 0.028 to 0.166 mmol L-1, and IC90 (concentration to achieve 90% of inhibition of spore germination) values varying from 0.156 to 0.528 mmol L-1. Allyldithiocarbimate salts are lead compounds for the development of new antifungals for coffee leaf rust and Asian soybean rust, devastating plant diseases with limited control options.

This paper describes the synthesis of four new organotin compounds of general formula: (Ph4P)[Sn(Cy)3(RSO2N=CS2)] [Ph4P = tetraphenylphosphonium cation, Cy = cyclohexyl, R = C6H5 (1), 4-ClC6H4 (2), 4-BrC6H4 (3) and 4-IC6H4 (4)]. They were obtained by the reaction between four different potassium N-R-sulfonyldithiocarbimate salts and tricyclohexyltin chloride in methanol, and were isolated as tetraphenylphosphonium salts. The elemental analyses of C, H, N and the data of high-resolution mass spectrometry were consistent with the proposed formulae. The 119Sn NMR spectra and 119Sn Mössbauer spectroscopic data were consistent with the presence of tetracoordinated tin(IV) species in solution and in the solid state. The electrolytic molar conductance and the integration curves in the 1H NMR spectra are in accord with the 1:1 proportion between the tetraphenylphosphonium cations and the complex anions. The activity of the new compounds in the vulcanization of nitrile rubber was evaluated and the results were compared to those achieved with the commercial accelerators: N-tert-butyl-2-benzothiazolesulfenamide (TBBS), tetramethylthiuram disulfide (TMTD) and zinc diethyldithiocarbamate (ZEDC).

Six new salts of organometallic complexes of tin(IV) with the general formulae: (Ph4P)2[Sn(Bu)2(RSO2N=CS2)2] and [Fe(phen)3][Sn(Bu)2(RSO2N=CS2)2] [Ph4P = tetraphenylphosphonium, R = CH3 (1), C2H5 (2) and C4H9 (3); Fe(phen)3 = tris(1,10-phenanthroline)iron(II), R = CH3 (4), C2H5 (5) and C4H9 (6)] were synthetized from potassium dithiocarbimates (RSO2N=CS2K2.H2O) in reaction with dichlorobis-n-butyltin(IV) and tetraphenylphosphonium chloride (1-3) in N,N-dimethylformamide or tris(1,10-phenanthroline)iron(II) (4-6) in methanol. The new compounds were characterized by elemental analysis of Fe and Sn, and by vibrational, Mössbauer and nuclear magnetic resonance of 1H, 13C and 119Sn spectroscopies. High-resolution mass spectra in the negative and positive modes were also obtained. The elemental analyses and the exact masses obtained for the cations and the complex anions were consistent with the proposed formulae. The Mössbauer spectroscopic data were consistent with the presence of tin(IV) with coordination numbers between 4 and 5 (compounds 1-6), and of hexacoordinated iron(II) (compounds 4-6). The 1H and 13C NMR spectra presented all the expected signals for the cations and anions, and the signals observed in the 119Sn NMR spectra indicated an equilibrium between tetra- and pentacoordination around the tin atoms in solution. The in vitro activity of the new compounds was evaluated against Botrytis cinerea and Colletotrichum acutatum.

<p>Botrytis blight or gray mold is a highly destructive disease caused by <italic>Botrytis</italic> spp., that infects flowers, trees vegetables, fruit, especially grapevines and strawberry. Three new compounds with general formula (A)₂[Zn(4-FC₆H₄SO₂N=CS₂)₂], where A = PPh₃CH₃ (<bold>2a</bold>), PPh₃C₂H₅ (<bold>2b</bold>), PPh₃C₄H₉ (<bold>2c</bold>), and the previously published compounds where A = PPh₄ (<bold>2d</bold>) and NBu₄ (<bold>2e</bold>), were synthesized by the reaction of 4-fluorophenylsulfonyldithiocarbimate potassium dihydrate and zinc(II) acetate dihydrate with the appropriate counter cations (A) halides. The new compounds were characterized by infrared, ¹H and ¹³C NMR spectroscopies. All these salts inhibited the growth of <italic>Botrytis cinerea</italic>, with compounds <bold>2c</bold> and <bold>2d</bold> showing greater antifungal activity than zinc dimethyldithiocarbamate, the active principle of the fungicide Ziram. The bis(dithiocarbimate)zincate(II) salts are also active against the bacteria <italic>Escherichia coli</italic> and <italic>Staphylococcus aureus</italic>.</p>

Four new compounds with the general formula [Fe(phen)3][Zn(RSO2N=CS2)2], where phen = 1,10-phenanthroline, R = 4-FC6H4 (1), 4-ClC6H4 (2), 4-BrC6H4 (3) and 4-IC6H4 (4), respectively, were obtained by the reaction of the appropriate potassium N-R-sulfonyldithiocarbimate (RSO2N=CS2K2) and tris(1,10-phenanthroline)iron(II) sulfate, with zinc(II) acetate dihydrate in dimethylformamide. The elemental analyses and the IR data were consistent with the formation of the expected complexes salts. The ¹H and 13C NMR spectra showed the signals for the cationic iron(II) complex and dithiocarbimate moieties. The molar conductance data were consistent with the 1:1 cation:anion complexes in 1-4. The antifungal activities of the compounds were tested in vitro against Candida albicans, Candida tropicalis and Colletotrichum gloeosporioides.

Here we describe the total syntheses and characterization by elemental analyses, infrared and NMR spectroscopy of three new compounds analogous to avenaciolide, a bis-γ-lactone isolated from Aspergillus avenaceus that possesses antifungal activity, where the octyl group of the natural product was replaced by aromatic groups containing chlorine and fluorine atoms. The effects of the avenaciolide, the novel compounds and their synthetic precursors on mycelia development and conidia germination of Colletotrichum gloeosporioides and Fusarium solani were evaluated in vitro. The title compounds were almost as active as avenaciolide. The absolute structures of the chlorinated analogs were determined by X-ray diffraction analysis.

O ZNIBU, acelerador de caráter lento foi avaliado neste trabalho em composições de polibutadieno. Este acelerador foi sintetizado com o objetivo de substituir, ou reduzir, o uso de alguns aceleradores comerciais muito utilizados em composições elastoméricas mas que, por serem formadores de nitrosaminas, podem ser prejudiciais à saúde. A fim de corrigir o caráter de acelerador lento do ZNIBU, este composto foi utilizado em conjunto com o acelerador comercial CBS (N-ciclohexil-2-benzotiazol-2-sulfenamida). Foi observado que pequenas quantidades dos dois aceleradores não são efetivas na aceleração da vulcanização nas composições do tipo goma pura. No entanto a presença de negro de fumo exerce um efeito positivo sobre a velocidade. As propriedades mecânicas estudadas mostram que o ZNIBU aumenta a resistência à tração da goma pura (35%), em comparação com a composição similar vulcanizada com CBS e, na presença do negro de fumo, este aumento é ainda mais expressivo (175%). Quanto à resistência ao rasgamento, a vulcanização com o ZNIBU forneceu o mais baixo valor da propriedade para a goma pura, enquanto que a composição com negro de fumo apresentou o mais alto valor.

ZNIBU, a slow accelerator, was evaluated in polybutadiene compositions. This accelerator was synthesized intending to replace or reduce the use of some very used commercial accelerators in rubber compositions which, due to their nitrosamine-forming potential, can be harmful to health. In order to correct for the slow accelerating character ZNIBU was used in combination with the commercial accelerator CBS (N-cyclohexyl-2-benzothiazole-2-sulfenamide). It was observed that small amounts of the accelerators are not effective in the vulcanization accelerating process of gum type compositions. Nevertheless, the presence of carbon black exerts a positive effect on the reaction rate. The investigated mechanical properties show that ZNIBU improves stress strength of the pure gum (35%), when compared with a similar composition vulcanized with CBS and, in the presence of carbon black, the increase is even more expressive (175%). As for the tear strength, the ZNIBU vulcanization provided the lowest value for the pure gum composition while the carbon black-filled composition presented the highest value for this property.

O efeito do tipo de acelerador no processo de vulcanização de compostos de borracha nitrílica com dois teores de acrilonitrila foi investigado. Dois aceleradores comerciais, dissulfeto de 2,2'-dibenzotiazol (MBTS) e bis (dimetilditiocarbamato) de zinco (ZDMC), de grupos químicos diferentes, tiazol e ditiocarbamato, respectivamente, foram selecionados e comparados com o composto bis (4 metilfenilsulfonilditiocarbimato-)zincato (II) de tetrabutilamônio (ZNIBU). Os resultados mostram que o tipo de acelerador não só afeta as características de cura, como também tem grande influência nas propriedades físicas. Entre os aceleradores estudados, MBTS foi o menos adequado para a formulação utilizada. Surpreendentemente, verificou-se que o ZNIBU mostrou comportamento intermediário, sendo mais eficaz do que o MBTS e menos eficiente que o ZDMC, considerado um ultra-acelerador, em relação ao tempo ótimo de vulcanização.

The effect of the type of accelerator on the vulcanization process of nitrile rubber compounds with two acrilonitrile amounts was investigated. Two commercial accelerators benzothiazole (MBTS) and zinc dimethyldithiocarbamate (ZDMC), from different chemical groups, thiazole and dithiocarbamate, respectively, were selected and compared with the compound bis (4 methylphenylsulfonyldithiocarbimato-)zincate (II) of tetrabutylammoniun (ZNIBU). The results show that the type of accelerator not only affects the cure characteristics, but also has great influence on the physical properties. Among the accelerators studied, MBTS was found to be the least adequate for the formulation used as far as rheometric parameters are concerned. Surprisingly, it was found that ZNIBU showed an intermediate behavior, being more efficient than MBTS but not as much as ZDMC, considered an ultra accelerator, as for the optimum cure time.

Neste trabalho a substância ZNIBU [bis(4-metilfenilditiocarbimato)zincato(II) de tetrabutilamônio] foi usada em formulações de borracha natural (NR) e o seu efeito como acelerador de vulcanização foi investigado. As composições, vulcanizadas com a substância em questão, foram submetidas a testes mecânicos e os resultados comparados com os de outras composições vulcanizadas com os aceleradores comerciais CBS (N-ciclohexil-2-benzotiazol-2-sulfenamida), TMTD (dissulfeto de tetrametiltiuram) e MBTS (dissulfeto de benzotiazol). Propriedades como dureza, resiliência e densidade foram avaliadas em presença ou não da carga negro de fumo.

The acceleration potential of ZNIBU [tetrabutyl ammonium bis(4-methylphenyldithiocarbimatozincate(II))] in the vulcanization process of natural rubber compounds was investigated. The vulcanized compounds were tested for hardness, resilience and density and compared with those vulcanized with commercial accelerators such as CBS (N-cyclohexyl-2-benzothiazolesulphenamide), TMTD (tetramethyl thiuram disulphide) and MBTS (dibenzothiazole disulphide). The new accelerator tested was found to be too slow for a commercial application, but its properties were similar to those of other accelerators.

Com o objetivo de avaliar o potencial agroquímico de uma série de compostos com atividade fungicida, foram preparadas e caracterizadas por análises elementares e espectroscopias no infravermelho e de RMN, três novas bis-gama-lactonas análogas ao avenaciolídeo, onde o grupo octila presente nesse produto natural foi substituído por grupos heptila, hexila e pentila. Os efeitos desses compostos e de seus precursores sintéticos no desenvolvimento micelial e na germinação de conídias de Colletotrichum gloesporioides foram avaliados in vitro. As bis-gama-lactonas análogas ao avenaciolídeo foram ativas, enquanto todos os precursores sintéticos não apresentaram atividade nas condições testadas. Este artigo descreve, ainda, a preparação e caracterização de 15 intermediários sintéticos inéditos.

In a study of the antifungal activity of selected compounds as potentials agrochemicals, we have prepared and characterized by elemental analyses, infrared and NMR spectroscopies three new bis-gamma-lactones analogous to avenaciolide, where the octyl group of this natural product was replaced by heptyl, hexyl and pentyl groups. The effects on the mycelia development and conidia germination of Colletotrichum gloesporioides of these compounds and their synthetic precursors were evaluated in vitro. The title compounds were active in the tested conditions, while all the synthetic precursors were inactive. The preparation and characterization of 15 new synthetic intermediates are also described.

O ácido 6alfa,7beta-di-hidroxivouacapan-17beta-óico (1) e o 6alfa,7beta-di-hidroxivouacapan-17beta-oato de metila (2) são produtos naturais isolados do extrato hexânico de frutos de Pterodon polygalaeflorus Benth. Este trabalho descreve a preparação e caracterização por espectroscopias no infravermelho, de ressonância magnética nuclear e por análise elementar do derivado inédito 6alfa,7beta-tiocarbonildioxivouacapan-17beta-oato de metila (5), a partir do éster 2. A estrutura do composto 5 foi determinada por difração de raios-X. Na concentração de 100 ppm, este composto inibiu o crescimento radicular de Sorgum bicolor L. (-28%) e não mostrou efeitos significantes sobre Cucumis sativus L..

The 6alpha,7beta-dihydroxyvouacapan-17beta-oic acid (1) and methyl 6alpha,7beta-dihydroxyvouacapan-17beta-oate (2) are natural products isolated from the hexane extract of Pterodon polygalaeflorus Benth fruits. Here we describe the preparation and characterization by infrared and nuclear magnetic resonance spectroscopy, and by elemental analysis of the novel derivative methyl 6alpha,7beta-thiocarbonyldioxyvouacapan-17beta-oate (5), from the ester 2. The structure of compound 5 was determined by X-ray diffraction. At the concentration of 100 ppm, this compound inhibited the radicle growth of Sorgum bicolor L. (-28%) and showed no significant effect on Cucumis sativus L..